background image

147

D-Link DIR-836L User Manual

Appendix E - GNU General Public License

8. Termination.

You may not propagate or modify a covered work except as expressly provided under this License.  Any attempt otherwise to propagate or modify 

it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of 

section 11).

However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until 

the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation 

by some reasonable means prior to 60 days after the cessation.

Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some 

reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure 

the violation prior to 30 days after your receipt of the notice.

Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this 

License.  If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material 

under section 10.

9. Acceptance Not Required for Having Copies.

 

You are not required to accept this License in order to receive or run a copy of the Program.  Ancillary propagation of a covered work occurring 

solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance.  However, nothing other than 

this License grants you permission to propagate or modify any covered work.  These actions infringe copyright if you do not accept this License.  

Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so.

10. Automatic Licensing of Downstream Recipients.

Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that 

work, subject to this License.  You are not responsible for enforcing compliance by third parties with this License.

An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or 

merging organizations.  If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of 

the work also receives whatever licenses to the work the party’s predecessor in interest had or could give under the previous paragraph, plus a 

right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable 

efforts.

Summary of Contents for Cloud Router 2500




































































































































































Reviews: