background image

i

D-Link COVR-C1203 User Manual

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any 

person or organization of such revisions or changes.

Manual Revisions

Trademarks

D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. 

All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries. 

App Store

SM

 is a service mark of Apple Inc.

Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc.
Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.
Copyright © 2018 by D-Link Corporation, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc.

Power Usage

ErP Power Usage

This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no 

packets being transmitted. If it is not needed during certain periods of time, it can be unplugged to save energy.
Network Standby: 

3.5

 watts

Preface

Revision

Date

Description

1.00

March 20, 2018

Initial release.

Summary of Contents for COVR-C1200












































































































Reviews: