55
D-Link COVR-C1203 User Manual
Section 3 - Configuration
Virtual Server
The virtual server allows you to specify a single public port on Covr Point A for
redirection to an internal LAN IP address and Private LAN port. To configure
the virtual server, from the Port Forwarding page click
Virtual Server
. To
return to the main Port Forwarding page, click
Port Forwarding
.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the
Add Rules
button. Click
Save
when you are done. If
you edit or create a rule, the following options will appear:
Name:
Enter a name for the rule. Alternatively, select the protocol/Application
from the drop-down menu.
Local IP:
Enter the IP address of the device on your local network to which the
external port will forward. Alternatively, select the device from the
drop-down menu.
Protocol:
Select the protocol of the traffic that will be forwarded to the selected
IP address (
TCP
,
UDP
,
Both
, or
Other
).
Protocol Number:
If you selected
Other
as the protocol, enter the protocol number.
External Port:
If you selected
TCP
,
UDP
, or
Both
as the protocol, enter the public
port you want to forward.
Internal Port:
If you selected
TCP
,
UDP
, or
Both
as the protocol, enter the private
port you want to open.
Schedule:
Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to
Always Enable
, or
you can create your own schedules in the
Schedule
section. Refer to
Schedule
on page
62
for more information.
Click
Apply
when you are done.
