5
Step 10: Click Finish to save your settings.
Now you can plug in the remaining COVR Point(s) and place them anywhere you want to extend your
whole home Wi-Fi to.
The remaining Covr Points will automatically synchronize with COVR Point A and obtain its
configuration settings.
Check the LED indicator on your Covr Points to ensure a good connection.
-
Solid white: Strong signal.
-
Blinking white: Weak signal. Move your Covr Point(s) closer to the Covr Point A until the LED
turns solid white.
-
Blinking Amber: Covr Point(s) can’t receive signal. Move your Covr Point(s) closer to the Covr
Point A until the LED turns solid white.
Note: You can turn off the LED (for both COVR router and COVR point(s):
Please launch your browser and enter http://covr.local./ into the address bar. Then log in and follow
the steps below:
Step 1: Click Management -> System Admin:
Summary of Contents for COVR-C1203
