37
Factory Reset
Q22: How do I reset my Covr router to factory default settings?
If you forgot your admin password or your device isn’t working properly, you can perform a reset to
return the device to its factory default settings.
Resetting your device will:
(1) Erase all your current settings. This cannot be undone.
(2) Reset the device admin password back to its default (blank).
(3) Not reset the firmware to the previous version.
Step 1: While the unit is powered on, use an unfolded paperclip to press the reset button on the base
of the Covr Router (Covr Point A) for 5 seconds. The Covr LED on the top of the router will turn
red t
o
indicate that the unit is restarting.
Step 2: The unit will reboot automatically. Once the LED is blinking with amber, the unit has been
reset and is ready to use.
Note: You only need to reset the Covr Router. The remaining Covr Points will automatically synchronize
and obtain their configuration settings from the Covr Router after finishing the setup process.
Summary of Contents for COVR-C1203
