21
D-Link COVR-C1203 User Manual
Section 3 - Configuration
Dynamic IP (DHCP)
Select
Dynamic IP (DHCP)
to obtain IP address information automatically
from your Internet Service Provider (ISP). Select this option if your ISP does not
specify an IP address to use.
Advanced Settings
Host Name:
The host name is optional but may be required by some ISPs. Leave
it blank if you are not sure.
Primary DNS
Server:
Enter the primary DNS server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
Secondary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address
Clone:
The default MAC address is set to the physical interface MAC address
of port
1
on the router. You can use the drop-down menu to replace
the Internet port’s MAC address with the MAC address of a connected
client.
Click
Save
when you are done.
