D-Link DWL-8200AP User Manual
2
Enable or Disable SSID broadcast. Enabling this feature broadcasts the SSID across the network.
Displays the default channel for the wireless network. All devices on the network must share the same channel.
The channel of an 802.11a network may not be set manually in certain regions (e.g. Europe and USA) in order to
comply with DFS (Dynamic Frequency Selection).
Note:
The wireless adapters will automatically scan and match the wireless setting.
This option is unavailable in WDS with AP mode.
Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly connect multiple networks.
Click on the
Scan
button to search for available wireless networks. Click on the network you want to connect to.
Select
Open System
to communicate the key across the network.
Select
Shared Key
to limit communication to only those devices that share the same WEP settings.
Select
Open System/Shared Key
to allow either form of data encryption.
Select
WPA-Personal
to secure your network using a password and dynamic key changes. (No RADIUS server
required.)
Select
WPA2-Personal
to secure your network using a password and dynamic key changes. No RADIUS server
required and encryption of data is upgraded with the Advanced Encryption Standard (AES).
Select
WPA-Auto-Personal
to allow the client to either use
WPA-Personal
or
WPA2-Personal
.
SSID Broadcast:
Channel:
Auto Channel Scan:
Remote AP MAC
Address:
WDS Site Survey:
Authentication:
