D-Link DWL-8200AP User Manual
Home > Advanced Settings > Multi-SSID
When Multi-SSID is enabled, you can configure your SSIDs for either
both
,
11a
only, or
11g
only networks.
Check to use a VLAN.
Allows you to prioritize per SSID.
Select the wireless band (
IEEE802.11a
or
IEEE802.11g
).
You can select up to 7 multi-SSIDs per band, the default multi-SSIDs is the primary, which puts the total to 8
multi-SSIDs per band.
Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s
factory default setting is
dlink
. The SSID can be easily changed to connect to an existing wireless network or to
establish a new wireless network.
Select Disable to prevent the SSID name to be broadcast.
Enable Multi-SSID:
Enable VLAN
Status:
Enable Priority:
Band:
Index:
SSID:
SSID Broadcast:
