D-Link DWL-8200AP User Manual
Status:
Status is Enabled by default. Un-check the box to disable the console.
Console Settings
Console Protocol:
Select the type of protocol you would like to use,
Telnet
or
SSH
.
SNMP Settings
Public
Community
String:
Enter the public SNMP community string.
Status:
Status is Enabled by default. Un-check the box to disable the SNMP functions.
Private
Community
String:
Trap Status:
Trap Server IP:
Trap Type:
Enter the private SNMP community string.
Check the box to enable the trap status.
Enter the trap server IP address. This is the IP address of the SNMP manager to receive traps sent from the
wireless access point.
Select System Trap or Wireless Trap.
Check the box to enable the Ping Control Settings status.
Ping Control
Settings
Status: