D-Link DWL-8200AP User Manual
8
2. The wireless client cannot access the Internet in the Infrastructure mode.
Make sure the wireless client is associated and joined with the correct access point. To check this connection:
Right-click
on the
Local Area Connection icon
in the taskbar and select
View Available Wireless Networks
. The
Connect to Wireless Network
screen will appear. Please make sure you have selected the correct available network, as shown in the illustrations below.
• Check that the
IP address
assigned to the wireless adapter is within the same
IP address range
as the access point and gateway.
Since the
DWL-8200AP
has an IP address of 192.168.0.50, wireless adapters must have an IP address in the same range, e.g.,
192.168.0.x. Each device must have a unique IP address; no two devices may have the same IP address. The subnet mask must
be the same for all the computers on the network.)
To check the
IP address
assigned to the wireless adapter:
double-click
on
the
Local Area Connection icon
in the taskbar > select the
Support tab
and the
IP address
will be displayed.
Please refer to
Checking the IP Address
in the
Networking Basics
section of this manual.)
• If it is necessary to assign a
Static IP Address
to the wireless adapter, please refer to the appropriate section in
Networking
Basics
.
If you are entering a
DNS Server address
you must also enter the
Default Gateway Address.
(Remember that if you
have a DHCP-capable router, you will not need to assign a static IP address. See
Networking Basics: Assigning a Static IP
Address
.)
