DAP-1150
Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Router Mode)
System Log
On the
System / System log
page, you can set the system log options and configure sending the
system log to a remote host.
Figure 150. The
System / System log
page. The
Configuration
tab.
To enable logging of the system events, select the
Logging
checkbox on the
Configuration
tab.
Then specify the needed parameters.
Control
Description
Logging type
Select a type of logging from the drop-down list.
•
Local
: the system log is stored in the device's memory (and
displayed on the
Log
tab). When this value is selected, the
Server address type
,
Server
, and
Port
fields are not
displayed.
•
Remote
: the system log is sent to the remote host specified in
the
Server
field.
•
Local and remote
: the system log is stored in the device's
memory (and displayed on the
Log
tab) and sent to the
remote host specified in the
Server
field.
Logging level
Select a type of messages and alerts/notifications to be logged.
Server address type
From the drop-down list, select the
IP
value to specify an IP address
of a host from the local or global network, or the
URL
value to
specify a URL address of a remote server.
Server
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
Port
A port of the host specified in the
Server
field. By default, the
value
514
is specified.
Page
168
of 175
