![background image](http://html.mh-extra.com/html/d-link/dap-1155/dap-1155_user-manual_76318113.webp)
DAP-1155
Wireless N150 Access Point & Router
User Manual
Configuring Device
To configure the access point as a client, select the
Enable client
checkbox. When the checkbox is
selected, the following fields are displayed on the page:
Parameter
Description
Broadcast wireless
network
If the checkbox is not selected, devices cannot connect to the access
point's WLAN. Upon that DAP-1155 can connect to another access
point as a wireless client.
Wireless network settings
SSID
The name of the network to which the access point connects.
BSSID
The unique identifier of the network to which the access point
connects.
Network Authentication
The authentication type of the network to which the access point
connects.
When the
Open
or
Shared
authentication type is selected, the following fields are available:
Parameter
Description
Enable Encryption WEP
The checkbox activating WEP encryption. When the checkbox is
selected, the
Default Key ID
field, the
Encryption Key WEP as
HEX
checkbox, the
WEP key length
drop-down list, and four
Encryption Key WEP
fields are displayed on the page. For the
Shared
authentication type the checkbox is always selected.
Default Key ID
The number of the key (from first to fourth) which will be used for
WEP encryption.
Encryption Key WEP
as HEX
Select the checkbox to set a hexadecimal number as a key for
encryption.
WEP key length
The length of WEP encryption key.
Select the value
64bit
to specify keys containing 5 ASCII symbols
or 10 HEX symbols.
Select the value
128bit
to specify keys containing 13 ASCII
symbols or 26 HEX symbols.
Encryption Key WEP (1-
4)
Keys for WEP encryption. The access point uses the key selected
from the
Default Key ID
drop-down list. It is required to specify
all the fields.
Page
113
of 158