![background image](http://html.mh-extra.com/html/d-link/dap-1155/dap-1155_user-manual_76318135.webp)
DAP-1155
Wireless N150 Access Point & Router
User Manual
Configuring Device
You can specify the following parameters:
Parameter
Description
Template
Select a virtual server template from the drop-down list, or select
Custom
to specify all parameters of the new virtual server
manually.
Name
A name for the virtual server for easier identification. You can
specify any name.
Interface
A WAN connection to which this virtual server will be assigned.
Protocol
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
Public port (begin)/
Public port (end)
A port of the access point from which traffic is directed to the IP
address specified in the
Private IP
field. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the
Public port (begin)
field and leave the
Public port (end)
field blank.
Private port (begin)/
Private port (end)
A port of the IP address specified in the
Private IP
field to which
traffic is directed from the
Public port
. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the
Private port (begin)
field and leave the
Private port (end)
field blank.
Private IP
The IP address of the server from the local area network. To choose
a device connected to the access point's LAN at the moment, select
the relevant value from the drop-down list (the field will be filled in
automatically).
Remote IP
The IP address of the server from the external network.
Enable NAT Loopback
If the checkbox is selected, users of the
access point
's LAN can
access the server, which IP address is specified in the
Private IP
field, using the
access point
's external IP address as the server's IP
address. If a DDNS service is configured on the
Advanced /
DDNS
page, the users can access the server via the device's domain
name.
Click the
Apply
button.
To edit the parameters of an existing server, select the relevant server in the table. On the opened
page, change the needed parameters and click the
Apply
button.
To remove a server, select the checkbox located to the left of the relevant line in the table and click
the
Delete
button. Also you can remove a server on the editing page.
To remove all servers from this page, click the
Clear all
button.
Page
135
of 158