DAP-1155
Wireless N150 Access Point & Router
User Manual
Configuring Device
Configuration
On the
System / Configuration
page, you can reboot the device, save the changed settings to the
non-volatile memory, restore the factory defaults, backup the current configuration, or restore the
access point's configuration from a previously created file.
Figure 113. The
System / Configuration
page.
The following buttons are available on the page:
Control
Description
Save
Click the button to save settings to the non-volatile memory. Please,
save settings every time you change the device's parameters.
Otherwise the changes will be lost upon hardware reboot of the
access point.
Reboot
Click the button to reboot the device. All unsaved changes will be
lost after the device's reboot.
Factory
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware
WPS/RESET
button
Backup
Click the button to save the configuration (all settings of the access
point) to your PC. The configuration backup will be stored in the
download location of your web browser.
Page
144
of 158