![background image](http://html.mh-extra.com/html/d-link/dap-1155/dap-1155_user-manual_76318045.webp)
DAP-1155
Wireless N150 Access Point & Router
User Manual
Configuring Device
PPTP + Static IP or L2TP + Static IP Connection
Figure 33. Configuring PPTP + Static IP WAN connection.
Fill in the
IP Address
and
Netmask
fields.
In the
Gateway IP address
field, enter the IP address of the gateway used by this WAN
connection.
In the
Primary DNS server
field, enter the address of the primary DNS server.
As a rule, the specified settings are enough to configure a non-protected connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page (for a detailed description of all the connection's
parameters, see the
Creating PPTP/L2TP + Static IP or PPTP/L2TP + Dynamic IP WAN
section, page 85).
Click the
Next
button to continue.
Page
45
of 158