DAP-1155
Wireless N150 Access Point & Router
User Manual
Configuring Device
PPPoE + Static IP Connection
Figure 28. Configuring PPPoE + Static IP WAN connection.
Fill in the
IP Address
and
Netmask
fields.
In the
Gateway IP address
field, enter the IP address of the gateway used by this WAN
connection.
In the
Primary DNS server
field, enter the address of the primary DNS server.
As a rule, the specified settings are enough at this step to configure a connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page (for a detailed description of all the connection's
parameters, see the
Creating PPPoE + Static IP or PPPoE + Dynamic IP WAN Connection
section, page 79).
Click the
Next
button to continue.
Page
40
of 158