DAP-1155
Wireless N150 Access Point & Router
User Manual
Configuring Device
PPTP + Dynamic IP or L2TP + Dynamic IP Connection
Figure 36. Configuring PPTP + Dynamic IP WAN connection.
If your ISP has provided the addresses of the DNS servers, deselect the
Obtain DNS server
addresses automatically
checkbox and fill in the
Primary DNS server
field.
As a rule, the specified settings are enough to configure a non-protected connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page (for a detailed description of all the connection's
parameters, see the
Creating PPTP/L2TP + Static IP or PPTP/L2TP + Dynamic IP WAN
section, page 85).
Click the
Next
button to continue.
Page
48
of 158