42
D-Link DAP-1560 User Manual
Section 3 - Configuration
LAN Connection
Type:
Access Point IP
Address:
Subnet Mask:
Gateway Address:
Device Name:
Use the drop-down menu to select
Static IP
if you
want to manually assign the IP address, subnet
mask, and gateway addresses. Select
Dynamic IP
(DHCP)
to automatically receive an IP address from
your DHCP server or router.
Enter the IP address you want to assign the bridge.
Enter the Subnet Mask you want to assign the
bridge.
Enter the Gateway you want to assign the bridge.
Enter the Device Name of the AP and click
Next
to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
This section will allow you to change the local network settings of the bridge and to configure the Static settings.
Network Settings
Static
