23
D-Link DAP-1955 User Manual
Section 3 - Configuration
Access Point Mode Settings
This page lets you configure the settings to use the DAP-1955 as an access point. Connect an Ethernet cable from your router’s LAN
port to the LAN port at the bottom of the DAP-1955.
To access this page, click the
Settings
drop-down menu at the top of the page, and select Extender. Click
Save
to apply the settings
and return to the home page.
Under Existing Network, choose
Ethernet
to utilize the DAP-1955 as an access point. Refer to “Extender Settings” on page 28 for
more information regarding configuration options.
YourRouter