13
D-Link DAP-2330 User Manual
Section 3 - Configuration
Channel:
Channel Width:
Captive Profile:
Authentication:
To change the channel, first toggle the
Auto Channel Selection
setting to
Disable
, and then use the drop-down menu to make
the desired selection.
Note:
The wireless adapters will automatically scan and match the wireless settings.
Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless
clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g wireless devices on your network.
Disable or select a Captive Portal profile for Primary SSID.
Use the drop-down menu to choose
Open System
,
Shared Key
,
WPA-Personal
,
WPA-Enterprise
, or
802.1x
.
• Select
Open System
to communicate the key across the network (WEP).
• Select
Shared Key
to limit communication to only those devices that share the same WEP settings. If multi-SSID is
enabled, this option is not available.
• Select
WPA-Personal
to secure your network using a password and dynamic key changes. No RADIUS server is required.
• Select
WPA-Enterprise
to secure your network with the inclusion of a RADIUS server.
• Select
802.1X
if your network is using port-based Network Access Control.
