25
D-Lnk DAP-3520 User Manual
Transmit Power:
This setting determines the power level of the wireless transmission. Transmitting power can be adjusted to eliminate overlapping of wireless
area coverage between two access points where interference is a major concern. For example, if wireless coverage is intended for half of
the area, then select
50%
as the option. Use the drop-down menu to select
100%
,
50%
,
25%
, or
.12.5%
.
WMM (Wi-Fi Multimedia):
WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applications over a Wi-Fi
network.
Ack Time Out (2.4 GHz, 64~200) or Ack Time Out (5 GHz, 50~200):
To effectively optimize throughput over long distance links enter a value for Acknowledgement Time Out between
50
and
200
microseconds
for 5 GHz or from
64
to
200
microseconds in the 2.4 GHz in the field provided.
Short GI:
Select
Enable
or
Disable
. Enabling a short guard interval can increase throughput. However, be aware that it can also increase the error
rate in some installations due to increased sensitivity to radio-frequency installations.
IGMP Snooping:
Select
Enable
or
Disable
. Internet Group Management Protocol allows the AP to recognize IGMP queries and reports sent between
routers and an IGMP host (wireless STA). When IGMP snooping is enabled, the AP will forward multicast packets to an IGMP host based
on IGMP messages passing through the AP.
Connection Limit:
Select
Enable
or
Disable
. This is an option for load balancing. This determines whether to limit the number of users accessing this
device. The exact number is entered in the User Limit field below. This feature allows the user to share the wireless network traffic and the
client using multiple APs. If this function is enabled, when the number of users exceeds this value, the DAP-3520 will not allow clients to
associate with the AP.
User Limit (0 - 64):
Set the maximum amount of users that are allowed access (
0
-
64
users).To use this feature, the Connection Limit above must be enabled.
For most users, a limit of
10
is recommended. The default setting is
20
.
Summary of Contents for DAP-3520 - AirPremier N Dual Band Exterior PoE Access Point
Page 1: ......
