3
D-Lnk DAP-3520 User Manual
Static Pool Setting
Function Enable/Disable:
Dynamic Host Configuration Protocol (DHCP) assigns
IP addresses to wireless devices on the network.
This protocol simplifies network management and
allows new wireless devices to receive IP addresses
automatically without the need to manually assign IP
addresses. Select
Enable
to allow the DAP-3520 to
function as a DHCP server.
Host Name:
Enter a name for the assigned client.
Assigned IP:
Use the Static Pool Settings to assign the same IP
address to a device every time you start up. The IP
addresses assigned in the Static Pool list must NOT
be in the same IP range as the Dynamic Pool. After
you have assigned a static IP address to a device via
its MAC address, click
Apply
; the device will appear in
the Assigned Static Pool at the bottom of the screen.
You can edit or delete the device in this list.
Assigned MAC Address:
Enter the MAC address of the device requesting
association here.
Subnet Mask:
Define the submask of the IP address specified in the
“IP Assigned From” field.
Gateway:
Specify the Gateway address for the wireless
network.
The DHCP address pool defines the range of IP addresses that can be assigned to stations on the network. A static pool allows specific
wireless stations to receive a fixed IP without time control.
Summary of Contents for DAP-3520 - AirPremier N Dual Band Exterior PoE Access Point
Page 1: ......
