3
D-Lnk DAP-3520 User Manual
WDS with AP mode
Wireless Band:
Select either
2.4.GHz
or
5.GHz
from the drop-down menu.
Mode:
WDS.with.AP
mode is selected from the drop-down menu.
Network Name (SSID):
Service Set Identifier (SSID) is the name designated for a
specific wireless local area network (WLAN). The SSID’s
factory default setting is
dlink
. The SSID can be easily changed
to connect to an existing wireless network or to establish a
new wireless network.
SSID Visibility:
Select
Enable
to broadcast the SSID across the network, thus
making it visible to all network users. Select
Disable
to hide
the SSID from wireless users.
Auto Channel Selection:
Enabling this feature automatically selects the channel that
will provide the best wireless performance. This feature is
not supported in WDS with AP mode. The channel selection
process only occurs when the AP is booting up.
Channel:
All devices on the network must share the same channel. To
change the channel, first toggle the
Auto Channel Selection
setting to
Disable
, and then use the drop-down menu to make
the desired selection.
Note:
Wireless clients will automatically scan and match the
wireless channel of the DAP-3520.
In WDS with AP mode, the DAP-3520 wirelessly connects multiple networks while still functioning as a wireless AP at the same time.
