background image

D-Lnk DAP-3520 User Manual

• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products 

sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer 
and shipped to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible 
for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via 
UPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an 
address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available upon 
request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product that is not 
packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from 
the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges 
for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by 
D-Link not to be defective or non-conforming.

What.Is.Not.Covered:

The Limited Warranty provided herein by D-Link does not cover:
Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty 
installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the 
model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for 
repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage 
that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other 
products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation 
sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product.

While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized 
D-Link Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.

Disclaimer.of.Other.Warranties:

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY 
OF  ANY  KIND WHATSOEVER  INCLUDING, WITHOUT  LIMITATION,  ANY WARRANTY  OF  MERCHANTABILITY,  FITNESS  FOR  A 
PARTICULAR PURPOSE AND NONINFRINGEMENT. 

IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF 
SUCH IMPLIED WARRANTY SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. 
EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, 
SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.

Summary of Contents for DAP-3520 - AirPremier N Dual Band Exterior PoE Access...

















































































Reviews: