background image

19

D-Link DAP-3662 User Manual

Section 3 - Configuration

WDS with AP Mode 

In WDS with AP mode, the DAP-3662 wirelessly connects multiple networks while still functioning as a wireless AP. After completing the desired 

settings, click the 

Save

 button to let your changes take effect.

Wireless Band:

Mode:

Network Name 

(SSID):

SSID Visibility:

Auto Channel 

Selection:

Channel:

Channel Width:

Captive Profile:

Select either 

2.4 GHz

 or 

5 GHz 

from the drop-down menu. 

Select 

WDS with AP

 mode from the drop-down menu. 

Service Set Identifier (SSID) is the name designated for a 

specific wireless local area network (WLAN). The SSID’s 

factory default setting is 

dlink

. The SSID can easily be 

changed to connect to an existing wireless network or to 

establish a new wireless network. The SSID can be up to 32 

characters and is case-sensitive.

Enable

 or 

Disable

 SSID visibility. Enabling this feature 

broadcasts the SSID across the network, thus making it 

visible to all network users.

Enabling this feature automatically selects the channel that 

provides the best wireless performance. 

Enable

 is set by 

default. The channel selection process only occurs when 

the AP is booting up.

All devices on the network must share the same channel. To 

change the channel, first toggle the 

Auto Channel Selection

 

setting to 

Disable

, and then use the drop-down menu to 

make the desired selection. 

Note: 

The wireless adapters will 

automatically scan and match the wireless settings.

Allows selection of the channel width you would like to 

operate in. 

20 MHz

 and 

Auto 20/40 MHz

 allow both 

802.11n and non-802.11n wireless devices on your network 

when the wireless mode is Mixed 802.11 b/g/n in 2.4G and 

Mixed 802.11 a/n in 5G. When the channel width is set to 

Auto 20/40 MHz

, then 802.11n wireless devices are allowed 

to transmit data using 40 MHz.

 Enable or disable captive profile for user authentication.

Summary of Contents for DAP-3662































































































Reviews: