DAP-600P
Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows 10
1. Click the
Start
button and proceed to the
Settings
window.
2. Select the
Network & Internet
section.
3. In the
Change your network settings
section, select the
Change
adapter options
line.
4. In the opened window, right-click the relevant
Wireless Network
Connection
icon. Make sure that your Wi-Fi adapter is on, then select
the
Properties
line in the menu displayed.
5. In the
Wireless Network Connection Properties
window, on the
Networking
tab, select the
Internet Protocol Version 4 (TCP/IPv4)
line. Click the
Properties
button.
6. Select the
Use the following IP address
radio button and enter the
value
192.168.0.51
in the
IP address
field. The
Subnet mask
field will be filled in automatically. Click the
OK
button.
7. Click the
Close
button in the connection properties window.
14
