47
D-Link DCS-2210/2230 User Manual
Configuration
ICR and IR
Here you can configure the ICR and IR settings. An IR(Infrared) Cut-Removable(ICR) filter can be disengaged for increased sensitivity in low light
environments.
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
IR Light Control:
Off:
On:
Sync:
Schedule:
The Day/Night mode is set automatically. Generally, the
camera uses Day mode and switches to Night mode
when needed.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule. The
camera will enter Day mode at the starting time and
return to Night mode at the ending time.
The camera can enable or disable the IR (infrared) light
according to your preferences. This setting provides
additional controls depending on your specific
application.
The IR light will always be off.
The IR light will always be on.
The IR light will turn on when the ICR sensor is on.
The IR light will turn on or off according to the schedule that you specify below.
Summary of Contents for DCS-2210
Page 1: ......