33
D-Link DCS-2330L User Manual
Section 3: Configuration
Enable UPnP Port
Forwarding:
Enable PPPoE:
User Name /
Password:
HTTP Port:
Access Name for
Stream 1~3:
HTTPS Port:
Authentication:
RTSP Port:
Enabling this setting allows the camera to add port
forwarding entries into the router automatically on
a UPnP capable network.
Enable this setting if your network uses PPPoE.
Enter the username and password for your PPPoE
account. Re-enter your password in the Confirm
Password field. You may obtain this information
from your ISP.
The default port number is 80.
The default name is video#.mjpg, where # is the
number of the stream.
You may use a PC with a secure browser to connect
to the HTTPS port of the camera. The default port
number is 443.
Depending on your network security requirements,
the Network Camera provides three types of
security settings for streaming via RTSP protocol:
disable and digest. If digest authentication is
selected, user credentials are encrypted using
MD5 algorithm, thus providing better protection
against unauthorized access.
The port number that you use for RTSP streaming
to mobile devices, such as mobile phones or PDAs.
The default port number is 554. You may specify the
address of a particular stream. For instance, live1.sdp
can be accessed at rtsp://x.x.x.x/video1.sdp where
the x.x.x.x represents the ip address of your camera.
