33
D-Link DCS-6616 User Manual
Section 3 - Configuration
PTZ Setup
Auto Pan:
Cruise:
Home:
Digital Zoom:
Freeze:
This page allows you to configure the pan/tilt/zoom settings for the camera. Changes to settings on this page take place immediately.
Auto Pan scans an area horizontally from left to right
or right to left. Up to 4 Auto Pan paths may be defined.
Select the button next to the path that you would like to
set. Use the navigation pad to move the camera view to
the desired start point and click
Set Start Point
. Move
the camera view to the desired end point and click
Set
End Point
. You may also specify the pan direction and
speed. Click the
Test
button to view the path that you
have just defined. Click
Stop
to end the test.
A Cruise path is a stored route defined through manual
adjustment of pan, tilt, and zoom. Up to 4 Cruise paths
may be defined. Select the button next to the path that you
would like to set. Click
Record Start
to begin recording a
path. Use the navigation pad or mouse to define a path
within the live video window. Click
Record End
when
you are done defining the path. Click the
Test
button to
view the path that you have just defined. Click
Stop
to
end the test.
You may turn on the home function and specify the PTZ
behavior.
You may turn digital zoom on or off.
If this option is turned on, the image will freeze at the end
of the predefined path and return to the starting point.
