40
D-Link DCS-6616 User Manual
Section 3 - Configuration
In a typical application, when motion is detected, the DCS-6616 Network Camera sends images to a FTP server or via e-mail as notifications.
As shown in the illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices.
When an event is triggered, a specified action will be performed. You can configure the Network Camera to send snapshots or videos to
your e-mail address or FTP site.
To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will know what action
shall be performed when a trigger is activated.
ex.
Motion detection,
Periodically, Digital input,
System reboot
Event Condition
ex.
Snapshot, Video Clips
ex.
Email, FTP
Media
(what to send)
Server
(where to send)
Action
Application
