16
D-Link DCS-8350LH User Manual
Section 3 - mydlink
1
Device Name
Tap to change the device’s name.
2
Privacy Mode
Tap to enable. Privacy mode will disable the camera feed.
3
Motion and Person Detection
Tap to set the Motion and Person Detection area and sensitivity settings.
4
Storage
Tap to change the video clips storage location from the microSD card to the cloud. You can
also subscribe to mydlink Cloud from here and view your current subscription plan.
5
Camera Microphone
Tap to enable or disable picking up sound near your camera in live view and recordings.
6
Color Night Vision
Tap to change night vision detection to
On
,
Off
or
Auto
. Color Night Vision is enabled by
default and allows you to see color images while viewing the live feed in low
light scenarios.
7
Anti-Flicker
Reduces flicker in the video. Tap
50 Hz
or
60 Hz
depending on the frequency of your lights.
8
Invert Image
Enable this to invert the camera view.
9
Status LED
Disabling this to turn off LED indicators.
10
Designated Contact
Tap to add, remove, or edit designated contacts for quick phone call upon receiving a
notification.
11
Wi-Fi
Tap to change the wireless network this device will use to connect to the Internet.
Note:
The network must be the same as all your other mydlink devices that you wish to use
the same account for.
12
Time Zone
Select the time zone to calibrate your device to.
13
Firmware
This displays the installed version of the firmware on your device. Tap to enter the update
settings. You can choose the most suitable time for automatic updates.
14
MAC ID
A unique physical address for identifying your device.
15
Restart Device
Tap this button to restart the device.
16
Remove Device
Tap this button to disconnect this device from your mydlink account.
2
3
4
5
6
7
8
1
9
10
16
15
11
12
14
13
