42
D-Link DCS-930L User Manual
Section 4 - Configuration
Time and Date
Current Time:
Time Zone:
Synchronize NTP
Server:
Daylight Saving:
Set the Date and
Time Manually:
Displays the current date and time.
Select the
Time Zone
for the location of your camera from the drop down menu.
Network Time Protocol will automatically synchronize your camera with an
Internet time server. Select an
NTP Server
from the drop-down menu that is
closest to the location of your camera.
If your region uses Daylight Saving Time (DST), you can click to enable DST here.
Select the offset (number of hours) from the drop-down menu. Select the start
and end dates and times for DST.
If
Synchronize NTP Server
is disabled, you can set the date and time manually.
Or you can simply click the
Copy Your Computer’s Time Settings
button to
automatically copy the date and time of the PC you are using.
Click
Save Settings
to save your settings.
This section allows you to configure the settings of the internal system clock for your camera.
