background image

45

D-Link DCS-935L User Manual

Section 4 - Security

Wireless Security

This section will show you the different levels of security you can use to protect your data from intruders.

The DCS-935L offers the following types of security:

• WPA2-PSK (Pre-Shared Key)
• WPA-PSK (Pre-Shared Key)
• WEP (Wired Equivalent Privacy)

What is WEP?

WEP stands for Wired Equivalent Privacy. It is based on the IEEE 802.11 standard and uses the RC4 encryption algorithm. WEP provides security by 

encrypting data over your wireless network so that it is protected as it is transmitted from one wireless device to another.

To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using WEP, you must determine 

the level of encryption. The type of encryption determines the key length. 128-bit encryption requires a longer key than 64-bit encryption. Keys 

are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange 

– alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to 

HEX for use over the network. Four keys can be defined so that you can change keys easily.

Summary of Contents for DCS-935L
































































Reviews: