10
PoE Rule
1.
Supplies power to PD device, meeting IEEE802.3af standards. It
is able to provide power to PD devices more sufficiently.
2.
Auto discovery feature, automatically recognize the connection of
PD device and immediately sends power to it
3.
Active circuit protection, automatically disables the port if there is
a short while other ports remain active
4.
Auto disable port via two different methods as below:
a. Over Current Protection
- 802.3af mode: if the current is over 375mA while other ports
remain active, the port will be auto disabled.
b. Over Output Power Limit
- 802.3af mode: if the port is over 15.4W while other ports
remain active, the lower priority port will be auto disabled.
5.
DES-1005P should follow the standard PSE pin-out standard of
Alternative A which is sending out power over number 1,2,3,6
pins of 8 wires of CAT5 UTP cable
6.
DES-1005P works with all D-Link 802.3af devices DES-1005P
works with all non-802.3af capable D-Link AP, IP Cam and IP
phone via DWL-P50
