background image

 

 

 

software that substantially conforms to D-Link’s functional specifications for the 
Software.  Except as otherwise agreed by D-Link in writing, the replacement Software is 
provided only to the original licensee, and is subject to the terms and conditions of the 
license granted by D-Link for the Software.  The Warranty Period shall extend for an 
additional ninety (90) days after any replacement Software is delivered.  If a material non-
conformance is incapable of correction, or if D-Link determines in its sole discretion that 
it is not practical to replace the non-conforming Software, the price paid by the original 
licensee for the non-conforming Software will be refunded by D-Link; provided that the 
non-conforming Software (and all copies thereof) is first returned to D-Link.  The license 
granted respecting any Software for which a refund is given automatically terminates.   

What You Must Do For Warranty Service: 

Registration Card.  The Registration Card provided at the back of this manual must be 
completed and returned to an Authorized D-Link Service Office for each D-Link product 
within ninety (90) days after the product is purchased and/or licensed.  The 
addresses/telephone/fax list of the nearest Authorized D-Link Service Office is provided 
in the back of this manual.  FAILURE TO PROPERLY COMPLETE AND TIMELY 
RETURN THE REGISTRATION CARD MAY AFFECT THE WARRANTY FOR THIS 
PRODUCT. 

Submitting A Claim.  Any claim under this limited warranty must be submitted in writing 
before the end of the Warranty Period to an Authorized D-Link Service Office.  The claim 
must include a written description of the Hardware defect or Software nonconformance in 
sufficient detail to allow D-Link to confirm the same.  The original product owner must 
obtain a Return Material Authorization (RMA) number from the Authorized D-Link 
Service Office and, if requested, provide written proof of purchase of the product (such as 
a copy of the dated purchase invoice for the product) before the warranty service is 
provided.  After an RMA number is issued, the defective product must be packaged 
securely in the original or other suitable shipping package to ensure that it will not be 
damaged in transit, and the RMA number must be prominently marked on the outside of 
the package.  The packaged product shall be insured and shipped to D-Link, 53 Discovery 
Drive, Irvine CA 92618, with all shipping costs prepaid.  D-Link may reject or return any 
product that is not packaged and shipped in strict compliance with the foregoing 
requirements, or for which an RMA number is not visible from the outside of the package.  
The product owner agrees to pay D-Link’s reasonable handling and return shipping 
charges for any product that is not packaged and shipped in accordance with the foregoing 
requirements, or that is determined by D-Link not to be defective or non-conforming. 

What Is Not Covered:   

This limited warranty provided by D-Link does not cover: 

Summary of Contents for DES-1200M

















































Reviews: