98
Purpose
Used to configure trunk groups.
Syntax config
link_aggregation group_id <group_id
1-4> ports <port_list | null > desc <trunk name
20>
Description
This command is used to configure trunk
groups.
Parameters <group_id
1-4>
-
Specify which trunk group to
configure
<port_list> -
Configure a port or range of ports to
add to the selected trunk group
<null > -
Remove all ports from the selected
group
<trunk name 20> -
The name of trunk group to
be created. A maximum of 20 characters can be
used.
Example usage:
To configure port 1~4 to “trunk1” group:
Figure 100. config link_aggregation command
show link_aggregation
Purpose
Used to display trunk groups status.
Syntax
show link_aggregation <group_id 1-4>
Description
This command is used to display trunk groups
status.
Parameters <group_id
1-4>
-
Specify which trunk group to
display