69
Syntax config
discovery trap_ip ipaddress
<ip_address>
Description
The command is configure an IP address of the
trap recipient of
SmartConsole Utility
to the
Switch.
Parameters <ip_address>
-
IP address of the Web
Management Utility.
Example usage:
To assigned IP address of the Web Configuration Utility to receive
trap message:
Figure 67. config discovery trap_ip command
config discovery trap_event
Purpose
Used to configure the events of the trap on the
Switch.
Syntax
trap_event [bootup | illegal_login | t_link]
Description
The command is configure the events of the trap
on the Switch..
Parameters bootup
-
Enabled the Switch’s boot up event.
illegal_login -
Enabled the Switch’s illegal login
event.
t_link -
Enabled the Switch’s twisted-pair ports
(port 1 – 8) linking status change event.
Example usage:
To configure the events type of the Switch: