84
disable igmp_snooping
show router_ports
show igmp_snooping
group
config igmp_snooping
{[host_timeout <sec 130-1225> |
router_timeout <sec 60-600> |
query_interval <sec 60-600> |
response_time <sec 10-25> |
robustness_variable <sec 1-255> |
lmquery_interval <sec 1-25> |
leave_time <sec 0-25> ] |
[enable|disable] vid <vid>}
Each command is listed, in detail, in the following sections.
config router_ports
Purpose
Used to configure ports as router ports.
Syntax config
router_ports [add | delete] <vid>
<port_list>
Description
This command allows you to designate a range
of ports as being connected to multicast-enabled
routers. This will ensure that all packets with
such a router as its destination will reach the
multicast-enabled router
−
regardless of protocol,
etc.
Parameters
add / delete -
Add or delete the specifies a port
or range of ports that will be configure as router
ports.
<portlist> -
Specifies a port or range of ports that
will be configured as router ports.
Example usage:
To set up static router ports: