DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
SNTP Settings
Time Setting
To configure the time settings for the Switch, open the
Administration
folder, then the
SNTP Settings
folder and click on
the
Time Setting
link, revealing the following screen for the user to configure.
Figure 6- 12. Current Time Settings window
The following parameters can be set or are displayed:
Parameter Description
Time Settings - Current Time
Current Time
Displays the current time.
Time Source
Displays the source of the time settings viewed here.
SNTP Settings
SNTP State
Use this pull-down menu to Enable or Disable SNTP.
SNTP Primary Server
The IP address of the primary server the SNTP information will be taken from.
SNTP Secondary
Server
The IP address of the secondary server the SNTP information will be taken from.
SNTP Poll Interval in
Seconds
The interval, in seconds, between requests for updated SNTP information.
Time Settings - Set Current Time
Year
Enter the current year, if you want to update the system clock.
Month
Enter the current month, if you would like to update the system clock.
Day
Enter the current day, if you would like to update the system clock.
Time in HH MM SS
Enter the current time in hours and minutes, if you would like to update the system
clock.
Click
Apply
to implement your changes.
40
