DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Add to group
- add a candidate to a group. Clicking this option will reveal the following screen for the user to
enter a password for authentication from the Candidate Switch before being added to the SIM group. Click OK
to enter the password or Cancel to exit the window.
•
Figure 6- 45. Input password window.
Property
- to pop up a window to display the device information, as shown below.
•
Figure 6- 46. Device Property window.
This window holds the following information:
Parameter Description
Device Name
This field will display the Device Name of the switches in the SIM group configured by
the user. If no Device Name is configured by the name, it will be given the name
default and tagged with the last six digits of the MAC Address to identify it.
Module Name
Displays the full module name of the switch that was right-clicked.
MAC Address
Displays the MAC Address of the corresponding Switch.
Remote Port No.
Displays the number of the physical port on the MS or CaS that the CS is connected
to. The CS will have no entry in this field.
Local Port No.
Displays the number of the physical port on the CS that the MS or CaS is connected
to. The CS will have no entry in this field.
Port Speed
Displays the connection speed between the CS and the MS or CaS
Click
Close
to close the
Property
window.
66