DES-3000 Series Layer 2 Switch CLI Reference Manual
disable sim
Purpose
Used to disable Single IP Management (SIM) on the Switch.
Syntax
disable sim
Description
This command will disable SIM globally on the Switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To disable SIM on the Switch:
DES-3026:4#disable sim
Command: disable sim
Success.
DES-3026:4#
show sim
Purpose
Used to view the current information regarding the SIM group on the Switch.
Syntax
show sim {[candidates {<candidate_id 1-100>} | members {<member_id 1-32>} |
group {commander_mac <macaddr>} neighbor]}
Description
This command will display the current information regarding the SIM group on the Switch,
including the following:
SIM Version - Displays the current Single IP Management version on the Switch.
Firmware Version - Displays the current Firmware version on the Switch.
Device Name - Displays the user-defined device name on the Switch.
MAC Address - Displays the MAC Address of the Switch.
Capabilities – Displays the type of switch, be it Layer 2 (L2) or Layer 3 (L3).
Platform – Switch Description including name and model number.
SIM State –Displays the current Single IP Management State of the Switch, whether it be
enabled or disabled.
Role State – Displays the current role the Switch is taking, including Commander,
Member or Candidate. A stand-alone switch will always have the candidate role.
Discovery Interval - Time in seconds the Switch will send discovery packets out over the
network.
Hold time – Displays the time in seconds the Switch will hold discovery results before
dropping it or utilizing it.
Parameters
candidates <candidate_id 1-100>
- Entering this parameter will display information
concerning candidates of the SIM group. To view a specific candidate, include that
candidate’s id number, listed from 1 to 100.
members <member_id 1-32>
- Entering this parameter will display information concerning
members of the SIM group. To view a specific member, include that member’s ID number,
listed from 1 to 32.
group commander_mac <macaddr>
- Entering this parameter will display information
concerning the SIM group of a commander device, identified by its MAC address.
neighbor
– Entering this parameter will display neighboring devices of the Switch. A SIM
neighbor is defined as a switch that is physically connected to the Switch but is not part of
the SIM group. This screen will produce the following results:
172
