DES-3000 Series Layer 2 Switch CLI Reference Manual
create snmp community
is used to identify the group of MIB objects that a remote SNMP
manager is allowed to access on the Switch.
read_only
−
Specifies that SNMP community members using the
community string created with this command can only read the
contents of the MIBs on the Switch.
read_write
−
Specifies that SNMP community members using the
community string created with this command can read from and write
to the contents of the MIBs on the Switch.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To create the SNMP community string “dlink:”
DES-3026:4#create snmp community dlink view ReadView read_write
Command: create snmp community dlink view ReadView read_write
Success.
DES-3026:4#
delete snmp community
Purpose
Used to remove a specific SNMP community string from the Switch.
Syntax
delete snmp community <community_string 32>
Description
The
delete snmp community
command is used to remove a
previously defined SNMP community string from the Switch.
Parameters
<community_string 32>
−
An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community
to delete. This string is used like a password to give remote SNMP
managers access to MIB objects in the Switch’s SNMP agent.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To delete the SNMP community string “dlink:”
DES-3026:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DES-3026:4#
show snmp community
Purpose
Used to display SNMP community strings configured on the Switch.
Syntax
show snmp community {<community_string 33>}
Description
The
show snmp community
command is used to display SNMP
community strings that are configured on the Switch.
Parameters
<community_string 32>
−
An alphanumeric string of up to 33
characters that is used to identify members of an SNMP
community. This string is used like a password to give remote
31
