D-Link DES-3010FA/GA/PA CLI Reference Guide
Page 59
sntp unicast client enable
The
sntp unicast client enable
Global Configuration mode command enables the device to use the Simple Net-
work Time Protocol (SNTP) to request and accept SNTP traffic from servers. To disable requesting and accepting
SNTP traffic from servers, use the
no
form of this command.
Syntax
sntp unicast client enable
no sntp unicast client enable
Default Configuration
The SNTP unicast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the
sntp server
Global Configuration mode command to define SNTP servers.
Examples
The following example enables the device to use the Simple Network Time Protocol (SNTP) to request and accept
SNTP traffic from servers.
Console(config)#
sntp unicast client enable
Summary of Contents for DES-3010FA
