DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Parameter Description
From and To
Select ports to be initialized.
Auth PAE State
The Authenticator PAE State will display one of the following:
Initialize, Disconnected,
Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth,
and
N/A.
Backend State
The Backend Authentication State will display one of the following:
Request, Response,
Success, Fail, Timeout, Idle, Initialize,
and
N/A.
Oper Dir
The status of the administrative-controlled direction, either
In
or
Both.
Port Status
A read-only field indicating a port on the Switch.
Initializing Ports for Host Based 802.1X
To initialize ports for the Host side of 802.1X, the user must first enable 802.1X by MAC address in the
DES-30xx Web
Management Tool
window. Click
Security > 802.1X > Initialize Port(s)
to open the following window:
Figure 10- 29. Initialize Ports (Host based 802.1X)
To initialize ports, choose the range of ports in the
From
and
To
field. Then the user must specify the MAC address to be
initialized by entering it into the
MAC Address
field and checking the corresponding check box. To begin the initialization, click
Apply
.
NOTE:
The user must first globally enable 802.1X in the
DES-30xx Web
Management Tool
window before initializing ports. Information in the
Initialize Ports Table
cannot be viewed before enabling 802.1X.
211
Summary of Contents for DES-3028
Page 306: ......
Page 307: ......
Page 327: ...D Link D Link D Link D Link 7 495 744 00 99 http www dlink ru e mail support dlink ru...
Page 332: ...Technical Support Web Web URL http www dlink jp com...
