DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
112
config traffic control
Syntax
config traffic control [<storm_grouplist
1-8>/all] broadcast
[enabled/disabled]/multicast
[enabled/disabled]/dlf
[enabled/disabled]/threshold <value 0-
255>
Description
This command is used to configure
broadcast storm control.
Parameters
<storm_grouplist 1-8>
−
Used to specify a
broadcast storm control group with the
syntax: module_id:group_id.
all
−
Specifies all broadcast storm control
groups on the switch.
broadcast [enabled/disabled]
−
Enables or
disables broadcast storm control.
multicast [enabled/disabled]
−
Enables or
disables multicast storm control.
dlf [enabled/disabled]
−
Enables or disables
dlf traffic control.
threshold <value 0-255>
−
The upper
threshold at which the specified traffic
control is switched on. The <value 0-255>
is the number of broadcast/multicast/dlf
packets, in Kbps, received by the switch
that will trigger the storm traffic control
measures.
Restrictions
Only administrator-level users can issue
this command
Summary of Contents for DES-3250TG
