DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
Web-Based Switch Management
205
and 100 Mbps devices, full- or half-
duplex. The Auto setting allows the
port to automatically determine the
fastest settings the device the port is
connected to can handle, and then to
use those settings. The other options
are
100M/Full
,
100M/Half, 10M/Full,
and
10M/Half.
There is no automatic
adjustment of port settings with any
option other than
Auto
.
Flow Control: Auto
Displays the flow control scheme used
for the various port configurations.
Ports configured for full-duplex use
802.3x flow control, half-duplex ports
use backpressure flow control, and
Auto ports use an automatic selection
of the two.
Lock <
Disabled
>
Allows the selected port (or port’s)
dynamic MAC address learning to be
locked such that new source MAC
addresses can not be entered into the
MAC address table for the locked port.
It can be changed by toggling between
Disabled
and
Enabled
.
Serial Port Settings
The
Serial Port Settings
window allows the configuration of
the switch’s serial port and out-of-band TCP/IP
communications using SLIP.
Click on the
Serial Port Settings
link from the
Basic Setup
folder.