DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
218
Web-Based Switch Management
Figure 6-31. Setup IP Interface – Edit
Choose a name for the interface to be added and enter it in the
Interface Name
field (if you are editing an IP Interface, the
Interface Name
will already be in the top field as seen in the
window above). Enter the interface’s IP address and subnet
mask in the corresponding fields. Pull the
Active
pull-down
menu to
Yes
and
click
Apply
to enter to make the IP interface
effective. Use the
Save Changes
dialog box from the
Basic
Setup
folder to enter the changes into NV-RAM.
The following fields can be set:
Parameter Description
Interface Name
This field displays the name for the
IP interface. The default IP interface
is named “System”.
IP Address
This field allows the entry of an IP
address to be assigned to this IP
