DES-3350SR Layer 3 Fast Ethernet Switch User’s Guide
204
config route redistribute dst ospf
the destination device.
mettype
−
allows the selection of one of the
methods for calculating the metric value.
Type-a calculates the metric (for RIP to
OSPF) by adding the destination’s interface
cost to the metric entered in the Metric field.
Type-2 uses the metric entered in the Metric
field without change. This field applies only
when the destination field is OSPF.
metric <value>
−
Allows the entry of an
OSPF interface cost. This is analogous to a
Hop Count in the RIP routing protocol.
Restrictions
Only administrator-level users can issue
this command.
Routing information source
−
RIP: the Static Route table, and
the Local interface routing information. Routing information will
be redistributed to OSPF. The following table lists the allowed
values for the routing metrics and the types (or forms) of the
routing information that will be redistributed.
Route Source
Metric
Metric Type
RIP
0 to 16777214
mettype 1
mettype 2
Static
0 to 16777214
mettype 1
mettype 2
Summary of Contents for DES-3350SR
