![background image](http://html1.mh-extra.com/html/d-link/des-3350sr/des-3350sr_user-manual_3345491032.webp)
D-Link DES-3350SR Standalone Layer 3 Switch
22
“System” to be enabled or disabled.
Switch Information
Click the
Switch Information
link in the
Configuration
menu.
Figure 7 - 2. Switch Information (Basic Settings) window
This window shows which (if any) external modules are installed, and the switch’s MAC Address (assigned by the factory and
unchangeable). In addition, the Boot PROM
Version and Firmware Version numbers are shown. This information is helpful to
keep track of PROM and firmware updates and to obtain the switch’s MAC address for entry into another network device’s address
table – if necessary.
You can also enter the name of the System, its location, and the name and telephone number of the System Administrator. It is
recommended that the person responsible for the maintenance of the network system that this switch is installed on be listed here.
Advanced Settings
Click
Advanced Settings
on the
Configuration
menu:
Figure 7 - 3. Switch Information (Advanced Settings) window
The following fields can be set:
Parameter
Description
Serial-port auto logout
time
The Auto Logout field may be set to Never, 2
minutes, 5 minutes, 10 minutes, and 15
minutes, depending on the time the user wishes
the Switch to be idle before automatically
Summary of Contents for DES-3350SR
