xStack
®
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
212
Web Authentication
Web-based Authentication Login is a feature designed to authenticate a user when the user is trying to access the
Internet via the Switch. The authentication process uses the HTTP protocol. The Switch enters the authenticating
stage when users attempt to browse Web pages (e.g, http://www.dlink.com) through a Web browser. When the Switch
detects HTTP packets and this port is un-authenticated, the Switch will launch a pop-up user name and password
window to query users. Users are not able to access the Internet until the authentication process is passed.
The Switch can be the authentication server itself and do the authentication based on a local database, or be a
RADIUS client and perform the authentication process via the RADIUS protocol with a remote RADIUS server. The
client user initiates the authentication process of WAC by attempting to gain Web access.
D-Link’s implementation of WAC uses a virtual IP that is exclusively used by the WAC function and is not known by
any other modules of the Switch. In fact, to avoid affecting a Switch’s other features, WAC will only use a virtual IP
address to communicate with hosts. Thus, all authentication requests must be sent to a virtual IP address but not to
the IP address of the Switch’s physical interface.
Virtual IP works like this, when a host PC communicates with the WAC Switch through a virtual IP, the virtual IP is
transformed into the physical IPIF (IP interface) address of the Switch to make the communication possible. The host
PC and other servers’ IP configurations do not depend on the virtual IP of WAC. The virtual IP does not respond to
any ICMP packets or ARP requests, which means it is not allowed to configure a virtual IP on the same subnet as the
Switch’s IPIF (IP interface) or the same subnet as the host PCs’ subnet.
As all packets to a virtual IP from authenticated and authenticating hosts will be trapped to the Switch’s CPU, if the
virtual IP is the same as other servers or PCs, the hosts on the WAC-enabled ports cannot communicate with the
server or PC which really own the IP address. If the hosts need to access the server or PC, the virtual IP cannot be
the same as the one of the server or PC. If a host PC uses a proxy to access the Web, to make the authentication
work properly the user of the PC should add the virtual IP to the exception of the proxy configuration. Whether or not a
virtual IP is specified, users can access the WAC pages through the Switch’s system IP. When a virtual IP is not
specified, the authenticating Web request will be redirected to the Switch’s system IP.
The Switch’s implementation of WAC features a user-defined port number that allows the configuration of the TCP
port for either the HTTP or HTTPS protocols. This TCP port for HTTP or HTTPs is used to identify the HTTP or HTTPs
packets that will be trapped to the CPU for authentication processing, or to access the login page. If not specified, the
default port number for HTTP is 80 and the default port number for HTTPS is 443. If no protocol is specified, the
default protocol is HTTP.
Summary of Contents for DES-3528 - xStack Switch - Stackable
Page 19: ...xStack DES 3528 DES 3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 18...
Page 214: ...xStack DES 3528 DES 3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 213...
Page 306: ...xStack DES 3528 DES 3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 305...
